Can not get the hammer to line up to hit the staple
I need to get the hammer of the stapler to line up in the slot so it will hit the staple. Any suggestions?
Tools & Hardware - Others - Staples - Swingline® 36115 Staple Guns Tools 1, 000 /box, Light-Duty,...
Answers & Comments
Take the magazine out of your stapler and visually inspect the driver head for any damage. If there are any nicks, worn edges, or warps, this will cause the problem you are experiencing. Usually you can remove the driver head and pound it flat then use a fine steel file to remove any imperfections with great results. If this doesn't help, feel free to contact me at [email protected]