Okay, I will take you through the complete process of taking your juicer apart. You would learn how to successfully remove the blade. There is something you are doing wrong that wouldn't make the blade remove-able. Just start afresh by following the below procedure;
Remove the Jack LaLanne's Power Juicer pusher from the chute. The pusher is the pestle-like device that slides into the chute through which you insert fruits and vegetables.
Pull down gently on the silver locking bar that holds lid, base, blade and other internal mechanisms together. Pull the locking bar forward until it snaps from the locked position and drops down to a 90-degree angle from its initial upright position.
Remove the lid from the base of the juicer. Lift the lid so that it reveals the internal workings of the juicer, including the blade and filter.
Remove the pulp collector from the juicer area.
Insert the pegs of the Power Juicer's crescent tool into the compatible holes on the blade. Push down on the crescent tool and turn it counterclockwise to unlock the blade. Carefully lift the blade from the Power Juicer's base.
Lift the filter from the base. The filter looks like a coffee pot filter and captures the pulp that the blades shave away from your juiced fruits and vegetables.
Lift the receptacle from the base. The receptacle is the last remaining removable piece of the Power Juicer. This mechanism captures the extracted juice and drains it out into your glass through its spout.
Answers & Comments
Hello,
- Remove the Jack LaLanne's Power Juicer pusher from the chute. The pusher is the pestle-like device that slides into the chute through which you insert fruits and vegetables.
- Pull down gently on the silver locking bar that holds lid, base, blade and other internal mechanisms together. Pull the locking bar forward until it snaps from the locked position and drops down to a 90-degree angle from its initial upright position.
- Remove the lid from the base of the juicer. Lift the lid so that it reveals the internal workings of the juicer, including the blade and filter.
- Remove the pulp collector from the juicer area.
- Insert the pegs of the Power Juicer's crescent tool into the compatible holes on the blade. Push down on the crescent tool and turn it counterclockwise to unlock the blade. Carefully lift the blade from the Power Juicer's base.
- Lift the filter from the base. The filter looks like a coffee pot filter and captures the pulp that the blades shave away from your juiced fruits and vegetables.
- Lift the receptacle from the base. The receptacle is the last remaining removable piece of the Power Juicer. This mechanism captures the extracted juice and drains it out into your glass through its spout.
I hope the above helps.
Okay, I will take you through the complete process of taking your juicer apart. You would learn how to successfully remove the blade. There is something you are doing wrong that wouldn't make the blade remove-able. Just start afresh by following the below procedure;
Good luck.