Can't access outside network
I have a di-624 router, and I'm using DynDns. but still can't access the camera from outside my network. When I ck it threw dyndns the access is refused but is not being blocked by a firewall and MY ip doesn't block port 80. I am very confused. help danb
Computers & Internet - D-Link - DCS - DCS-900W Network Camera
Answers & Comments
I had all the other port forward settings correct, but I noticed that the default gateway was set to 0.0.0.0 instead of 192.168.0.1, in the camera settings. This threw me as I could connect easily within the network, and I thought all those settings were good. I guess it totally makes sense though. No gateway, no way to get outside the network. After I changed that, it came right up outside the network. Hope this helps someone...
Usually, the problem can be one of 2 or both. 1, do you have a firewall? If so, you're blocking your incoming signal. That brings up the second question....
2. Have you assigned a different port (other than 80) and opened it on your router?
Those two things should normally get you on the road. Good luck.