I had to remove the door to get it into my new house, but now cannot get it back on. Feeling kind of silly and very frustrated at this point....... Please help?!?
Kitchen Ranges - DCS - RGS-486GD Gas Kitchen Range
This technique is for a DCS range. On the hinge flanges their are two parts to each side. The lower flange has a little clip on it that attaches to the upper flange. To attach these bend these by laying the door down with the inside of the door up and using a rag or something to pad the palm of your hand, press the upper flange down till it meets the lower flange then hinge the clip up (that is on the lower one) and attach it on to the upper one. Do this on both sides then pick up door and slide the flanges into the slots on the range till they meet resistance. Bend the door down slightly, release the clips and close the door. If this doesn't work the first time, repeat process with different door angle. Be careful not to force anything, this is actually easier than it appears.
We had to use this method today. It worked. We struggled for hors before someone said lets look on the internet for an answer. Although I wasn't able to make the chicken parm today I am so thankful we were able to get the door back on and didn't have to call a service man. by the way, the door was taken off because my sons ipod touch slid underneath the stove and he tried to lift it to retrieve it.We had to use this method today. It worked. We struggled for hors before someone said lets look on the internet for an answer. Although I wasn't able to make the chicken parm today I am so thankful we were able to get the door back on and didn't have to call a service man. by the way, the door was taken off because my sons ipod touch slid underneath the stove and he tried to lift it to retrieve it.
Answers & Comments
This technique is for a DCS range. On the hinge flanges their are two parts to each side. The lower flange has a little clip on it that attaches to the upper flange. To attach these bend these by laying the door down with the inside of the door up and using a rag or something to pad the palm of your hand, press the upper flange down till it meets the lower flange then hinge the clip up (that is on the lower one) and attach it on to the upper one. Do this on both sides then pick up door and slide the flanges into the slots on the range till they meet resistance. Bend the door down slightly, release the clips and close the door. If this doesn't work the first time, repeat process with different door angle. Be careful not to force anything, this is actually easier than it appears.
We had to use this method today. It worked. We struggled for hors before someone said lets look on the internet for an answer. Although I wasn't able to make the chicken parm today I am so thankful we were able to get the door back on and didn't have to call a service man. by the way, the door was taken off because my sons ipod touch slid underneath the stove and he tried to lift it to retrieve it.