Most saws start with "L" and "H" turned out about 1 full turn from bottomed out. See if that will get you close enough to have it run. Count in the turns as you do this so you can , at least, put it back to where it is now.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Most saws start with "L" and "H" turned out about 1 full turn from bottomed out. See if that will get you close enough to have it run. Count in the turns as you do this so you can , at least, put it back to where it is now.