These are the steps on how to program your Universal Remote Control to your device even without the list of code.
1. Manually turn ON your device. 2. Press and "HOLD" CODE SEARCH 3. Press and release the device button you want to set up 4. Release CODE SEARCH. 5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second). 6. Once the device turns off, press and release ENTER. 7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.
Answers & Comments
These are the steps on how to program your Universal Remote Control to your device even without the list of code.
1. Manually turn ON your device.
2. Press and "HOLD" CODE SEARCH
3. Press and release the device button you want to set up
4. Release CODE SEARCH.
5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
6. Once the device turns off, press and release ENTER.
7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.