Car will not start?
I was doing some wiring on aftermarket gauges and accidentally grounded a wire now nothing works and the car is imobilized. the security light blinks the ignition is lit up red and turning the key does nothing! idk what to do anymore any ideas?
Cars & Trucks - Subaru - Legacy - 2005 Subaru Legacy 2.5i
Answers & Comments
Not to be a smartazz, but it sounds like you've already done enough! Take your ride to a Subaru dealer and let them figure it out. In the long run, it'll be worth the $$.
Do you know what the wire your grounded is for ? Did it spark ? You could have blown a fuse somewhere , did you check ?
Where abouts on the vehicle were you doing this , under the dash ?
Yea maybe your best bet would be to take to the dealer ! Sorry ,but are you aware of serial target="_blank" rel="nofollow">http://www.aa1car.com/library/can_system...
The stock gauges on your vehical get there info from the PCM - engine computer over this style="display:none;">Yea maybe your best bet would be to take to the dealer ! Sorry ,but are you aware of serial data netwoks ? All the modules on your vehical share info over these networks an if you shorted out one of these networks your vehicle will not start. Read this on C.A.N http://www.aa1car.com/library/can_systems.htm The stock gauges on your vehical get there info from the PCM - engine computer over this data network !