I would check timing belt if had not been done due at 60k have not seen them go much further if that be the case it will wipe out the teeth on the crank. remove upper cover 10mm bolts and turn crank and see if cam gears move while turning .good luck
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
I would check timing belt if had not been done due at 60k have not seen them go much further if that be the case it will wipe out the teeth on the crank. remove upper cover 10mm bolts and turn crank and see if cam gears move while turning .good luck