For the carb idle screw and the carb air screw, IMPORTANT > do not tighten these two screws down. Only screw these in until they LIGHTLY seat. Now turn each screw one and one half turns outward. Set the engine idle speed from this point. Pleas rate this answer. Thanks fergie881!
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
For the carb idle screw and the carb air screw, IMPORTANT > do not tighten these two screws down. Only screw these in until they LIGHTLY seat. Now turn each screw one and one half turns outward. Set the engine idle speed from this point.
Pleas rate this answer. Thanks fergie881!