Carrier Weather Maker XS. Changed pilot igniter assembly. Now pilot lights, main burner lights and will run for a minute or two then shuts off and blower kicks on for a bit. Blower stops and start-up sequence begins a second time. This time after burner ignition gas valve begins to modulated open and closed with the relay on top "clicking." Flame constantly goes in and out. Any thoughts would be appreciated. Thank you
Heating & Cooling - Carrier - XHB123D X/Y Series Heat/Cool Air Conditioner
Answers & Comments
There should be a flame sensor mounted on the pilot bracket. This sensor maybe bad or is out of position.