Casio te-2000 I have put the data into the till that we require ie: staff codes and programed the department keys to my spec and the till will not respond? the data is there it just does not marry.....help!! :O) Tracey
Retail Supplies - Casio - Parts Cash Register PC Desktop
Hi Tracey, Don't worry, we can get to the bottom of your problem. I need to know a bit more about the problem. Are you saying that the wrong names and prices come up when you use the departments, or is it giving an error (if so, what name/ number is the error)? Please let me know as much as you can about the problem, and I'll get back to you.
Ok. That's strange. If you've initialised it fully, then you've lost system settings as well, so the problem can get worse. However, I would expect the departments to all return to default where they should easily be programmed, so we'll start there.
To set department names:
Turn key to Program mode. Press 2 then SUBTOTAL. You should see 'P2' on display. Enter characters for new name. Press 00 (double zero) button. Press department to set the name onto. Press SUBTOTAL.
Try this and see if any depts work in REG mode. You will need to type a price (no decimal point), then press a dept.
Mark
Ok. That's strange. If you've initialised it fully, then you've lost system settings as well, so the problem can get worse. However, I would expect the departments to all return to default where they should easily be programmed, so we'll start there.
To set department names:
Turn key to Program mode. Press 2 then SUBTOTAL. You should see 'P2' on display. Enter characters for new name. Press 00 (double zero) button. Press department to set the name onto. Press SUBTOTAL.
Try this and see if any depts work in REG mode. You will need to type a price (no decimal point), then press a dept.
Answers & Comments
Hi Tracey,
Don't worry, we can get to the bottom of your problem. I need to know a bit more about the problem. Are you saying that the wrong names and prices come up when you use the departments, or is it giving an error (if so, what name/ number is the error)? Please let me know as much as you can about the problem, and I'll get back to you.
Mark
Ok. That's strange. If you've initialised it fully, then you've lost system settings as well, so the problem can get worse. However, I would expect the departments to all return to default where they should easily be programmed, so we'll start there.
To set department names:
Turn key to Program mode.
Press 2 then SUBTOTAL. You should see 'P2' on display.
Enter characters for new name.
Press 00 (double zero) button.
Press department to set the name onto.
Press SUBTOTAL.
Try this and see if any depts work in REG mode. You will need to type a price (no decimal point), then press a dept.
Mark