For Installing & Software purpose you can follow below steps provided by me
1. Removed RAM until I had left 2gb 2. Installed Daniel K driver (vers 1.5 google it) 3. Installed Kx driver (3550-x86 google it) 4. Added the rest of the RAM. 5. Soundcard works good with more the 2GB of RAM on WIN 7 x86
If you have kx driver and you don't get 5.1 sound go to control panel -> sounds -> chose "SPDIF/AC3 Output -> press Set as Default
& u can Download the best software if you have installedhardware from below link too.
Answers & Comments
Hi
For Installing & Software purpose you can follow below steps provided by me
1. Removed RAM until I had left 2gb
2. Installed Daniel K driver (vers 1.5 google it)
3. Installed Kx driver (3550-x86 google it)
4. Added the rest of the RAM.
5. Soundcard works good with more the 2GB of RAM on WIN 7 x86
If you have kx driver and you don't get 5.1 sound go to control panel -> sounds -> chose "SPDIF/AC3 Output -> press Set as Default
& u can Download the best software if you have installedhardware from below link too.
Chaeck this out
http://support.creative.com/Products/product_list.aspx?catID=1&CatName=Sound+Blaster
May this will surely help you a lot.
thanks