CDA Dishwasher WC140-IN No Power No Lights
D/W has no power, no lights (therefore no error codes). I think it died in between usage, as the D/W was empty when problem spotted. D/W plugged in to spurred socket, but power is there. Changed fuse, no difference. Used the fuse from D/W in another appliance, and it works. So fuse and socket okay. Checked plug, all okay. No loose wires. No RCD trip on main board, otherwise other sockets would be dead. I'm sure you can tell from the model, this is integrated and I have not had the entire unit out, but assume power cable from plug to unit is okay and not compromised. I'm guessing I am going to need to remove the front panel to get in to the door section, but I have no idea what to look for or what to test via a multimeter.
Dishwashers
Answers & Comments
Hi,
This is probably a fault with the PCB and you may need an engineer to replace the part.
If your dishwasher is still under warranty, call CDA.
Best,
Dan