The steps below are to change your access code to a new code. This will also remove any previous codes stored in the Powerbolt's memory.
Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button.
Press the PROGRAM button twice, enter the same new code and then press the LOCK button once.
Press the PROGRAM button three times, enter the same new code and then press LOCK once.
If your old code still remains in the unit, you will need to perform a hard reset of the unit. To perform a hard reset of the unit, remove all four batteries and leave them out for 1 hour. After the hour has passed, you may re-enter the batteries.
United States of America Customer Service Contact Information Call Us Toll Free: 800-422-4278 (Mon-Fri, 6:00am - 4:30pm PST)
Answers & Comments
The steps below are to change your access code to a new code. This will also remove any previous codes stored in the Powerbolt's memory.
- Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button.
- Press the PROGRAM button twice, enter the same new code and then press the LOCK button once.
- Press the PROGRAM button three times, enter the same new code and then press LOCK once.
If your old code still remains in the unit, you will need to perform a hard reset of the unit. To perform a hard reset of the unit, remove all four batteries and leave them out for 1 hour. After the hour has passed, you may re-enter the batteries.
United States of America Customer Service Contact Information
Call Us Toll Free: 800-422-4278 (Mon-Fri, 6:00am - 4:30pm PST)
Here is a link to the complete instructions:
http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx