Chargers green light goes off as soon as inserted in boards 3 pin connector and not charging. seems dead
Bought new charger and still same. opened up and battery seems fully charged as measures 36v. charger says red light shows when charging or fully charged in green. but light green when only inserted in wall socket so assumed psu bust even before connecting to scooter port. when inserted into 3 pin green light goes off. new charger does same. when opened socket side blue wire was connected to green and green to blue so maybe someone else as alreadfy tried fixing and put leads in wrong. battery reads 36v on mmetre so seem fully charged but dead
Health & Beauty - Blue
Answers & Comments
Hi testing battery voltage will not give an accurate reading on battery condition U need a BATTERY LOAD TESTER.it will check the condition & give U a true reading on there condition ,..if batteries r good the next thing to check is the control box the charger circuit runs into the control then to the batteries if control box is faulty this could b the problem .,with youre charger not charging . LOAD TESTER AVAILABLE ON E/BAY APROX COST $35 , Cheers