"close door" message
I have changed the door interlock switch but i'm still getting the message. Traced neutral cable from switch to the PCB behind the front facia panel. It looks like one of the components has popped. Could this be the problem and what is the PCB called? Thanks
Washing Machines - Hotpoint - Ultima WD72 Front Load Washer/Dryer
Answers & Comments
This is a regular fault with these machines im looking at three of them its definatly the PCB nomally you will see a burt out track or something on the corner of the baord im afraid you will need to replace this part if you decide to do this mark all the plugs on the pcb with coulored felt tip pens to avoid putting them on the new board in the wrong place definatly worth repairing exellent machine