CLP-500 is printing only on left side of paper
CLP-500 is printing only about four centimeters on the left side on the paper. First I noticed it printed about eight cm, half hour later only those four cm.
I have booted my Windows XP, tried different programs, test print and even that DEMO-print directly from the printer, which should not depend on those windows-drivers. Same proble all the time.
Yes, it's old and I have used thos fill-in-toners, never changed anything although it has been saying for two years "Replace belt, imaging unit... all the things"
Have it died now?
I have booted my Windows XP, tried different programs, test print and even that DEMO-print directly from the printer, which should not depend on those windows-drivers. Same proble all the time.
Yes, it's old and I have used thos fill-in-toners, never changed anything although it has been saying for two years "Replace belt, imaging unit... all the things"
Have it died now?
Office Equipment & Supplies - Samsung - CLP - CLP-500 Laser Printer
Answers & Comments
You'll need to look at
Drum Unit - these can go beyond their rated life
Transfer Belt - these can fail suddenly and dramatically, often quite soon after their rated life is reached.
Also check Transfer Roller (open the duplexer door to see this - grey (black when new) foam roller about 25mm diameter purple plastic tabs on ends (1 may be black). This is critical to good quality prints, as it maintains the contact between paper and Transfer Belt AND electrostatically pulls the toner off the Transfer Belt onto the paper.