Spin cycle won't run. I removed the motor to see if I could changes the brushes- but this model does not have removal brushes. I re-installed the motor and tried the spin cycle and it worked like a charm! so I attached the back cover, slid the washer back into place and tried a "quick wash cycle" with 2 towels and the next thing I know water is all over the floor! I had orginally checked the drain for cloggs and must have not closed the cap tight enough. Either way, the spin cycle still would not run. Any suggestions? I am going to revisit the drainage to see if something is potentially blocking the drain ( I cleared out 2 hairpins with my initial examination)

Washing Machines - Bosch - Nexxt 500 WFMC3301 Front Load Washer