Is it a single handle or double handle faucet? If it is a single: 1. Remove handle via setscrew the side of the handle (possibly under a decorative cap with the company name) 2. Unscrew the packing nut holding the valve cartridge in 3. Remove cartridge and access washers For double handle 1. Remove decorative cap on top of handle with a think screw driver. 2. Remove handle and packing nut holding the valve stem in place 3. Remove valve stem and body to access washers and o-rings.
Remember to turn water off at the source prior to doing any work. Replacement is just reverse of removal and don't forget to use a washer grease on all washers/o-rings when reassembling.
Answers & Comments
Is it a single handle or double handle faucet?
If it is a single: 1. Remove handle via setscrew the side of the handle (possibly under a decorative cap with the company name) 2. Unscrew the packing nut holding the valve cartridge in 3. Remove cartridge and access washers
For double handle 1. Remove decorative cap on top of handle with a think screw driver. 2. Remove handle and packing nut holding the valve stem in place 3. Remove valve stem and body to access washers and o-rings.
Remember to turn water off at the source prior to doing any work. Replacement is just reverse of removal and don't forget to use a washer grease on all washers/o-rings when reassembling.