Hi, I have a Hover SE220 1200 Special Edition. On switching the machine on it would seem that the water pressure entering the machine is no longer strong enough to completely dissolve the washing powder tablet. I have tried changing both water relays for known working ones the same fault. The cold water relay does not work although there is supply power going into the relay and also coming out of the relay (open circuit) on a black lead which goes into the back of the main program switch. The hot water relay has power going into its relay (both supply leads are in parallel) and a return blue lead. The relay works OK and hot water enters the drum etc. What I would like to get hold of is a wiring diagram for the machine and to confirm what the problem is. I am thinking it might be the program switch. I am a sparks by trade but have little experience with Hover washing machines. Many thanks in anticipation. Regards, Brimes1

Washing Machines - Hoover - AL120 Front Load Washer