Make sure water valve/tap is fully turned on. If it is, then turn off, and remove inlet pipe to washer, and check the filter in the hose or the valve, i9f clean, then could be a faulty inlet valve. Please rate my solution. Thankyou.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Make sure water valve/tap is fully turned on.
If it is, then turn off, and remove inlet pipe to washer, and check the filter in the hose or the valve, i9f clean, then could be a faulty inlet valve.
Please rate my solution.
Thankyou.