Computer will not boot with second hard drive
Hello,
Once I disconnect the second hard drive (SATA2) from my XC Cube edition, the computer boots fine. With it connected however, it stalls on the XC Cube logo upon startup. There is a single beep on startup, and then it just hangs on th logo.
I did start getting a Delayed Write Failure with the second drive about a month ago, but the problem just went away without me doing anything and it was fine for several weeks up until now. Please help!
The second drive is a Seagate Baracuda 1 Terabyte.
Once I disconnect the second hard drive (SATA2) from my XC Cube edition, the computer boots fine. With it connected however, it stalls on the XC Cube logo upon startup. There is a single beep on startup, and then it just hangs on th logo.
I did start getting a Delayed Write Failure with the second drive about a month ago, but the problem just went away without me doing anything and it was fine for several weeks up until now. Please help!
The second drive is a Seagate Baracuda 1 Terabyte.
Computers & Internet - AOpen - XC Cube EZ65 Barebone
Answers & Comments
It look like harddisk problem is keep going. plug out the disk and try. if it continues and says there is not problem you can say mmotherboard is working well and you have really disk problem
put out the harddive and work without harddive the pc. look whats going on. i wanna sure if it is really disk problem or mainboard.
pls rate this when you solved.