Connect Furuno 1732 to st8002 autopilot
I'm trying to hook my 1732 navnet to my st8002 12121 autopilot.need to know it autopilot is capability of handling the RS232 voltage from the1732.I think the wiring from the 1732 is white+ and ground sheld negative.
GPS - Furuno - Navnet 1732 GPS Receiver
Answers & Comments
It will handle the voltage. as far as the wiring goes, you'll have to decide which port to use. the wire coloring is different. you'll have to send your nmea out data from port 3 white and shield ( Like you said) to the pilot and receive your heading data from the pilot on port 2.