Connect subwoofer etc to nad 3020I stereo amplifier
Cannot find instructions now, had them for years.
I have connected my variable sound out from tv to the tuner in on my amp, tried the gold plated phono but nearly blew the satelllite speakers on trial !!?!!
So into the tuner I have gone...
I want to connect a sub to it, so I have tried various routes taking these arc connectors/plugs out using the pre out to plug the sub in, does work, but then I am looping back from pre in in to aux inputs to get sound through satelites!
Must be a simpler and more sensible way, to it and to use the power of phono!!!
Want to get this right before I get a really good sub, and or get a 5.1 amp, don't really want to ditch the nad 3020I
Thanks?!
I have connected my variable sound out from tv to the tuner in on my amp, tried the gold plated phono but nearly blew the satelllite speakers on trial !!?!!
So into the tuner I have gone...
I want to connect a sub to it, so I have tried various routes taking these arc connectors/plugs out using the pre out to plug the sub in, does work, but then I am looping back from pre in in to aux inputs to get sound through satelites!
Must be a simpler and more sensible way, to it and to use the power of phono!!!
Want to get this right before I get a really good sub, and or get a 5.1 amp, don't really want to ditch the nad 3020I
Thanks?!
Audio Players & Recorders - NAD - C320 2-Channel Amplifier
Answers & Comments
Hi Info
You can use a 2 x male RCA to RCA female adaptor lead(what you need to ask for) like this one
use it to jumper your pre-out/main in connection on the rear, and connect an RCA lead to the Female socket on the adaptor lead. That will get you going. You can get them most places that sell electronic bits and peices. I am happy to answer any questionsa you may have
regards robotek