How do I open ports in the Virtual Server? You need to forward the ports used by the application to the server running the application in the Virtual Server, which is present in the router's management screen, as follows.
Open your web browser, type in the router's IP address (standard: 'http://192.168.2.1') and press enter.
Click on Login, Advanced Setup, NAT, Virtual Server.
Enter the port details and enable it as follows:
Private IP Private Port Type Public Port 192.168.2.x xxx TCP xxx 192.168.2.x xxx UDP xxx To access the application, you can open up the ports specific to the application in the special application, which is present in the router management screen as follows:
Open your web browser, type in the router's IP address (standard: 'http://192.168.2.1') and press enter.
Click on Login, Advanced Setup, NAT, Special Application.
Enter the port details and enable it as follows:
Trigger Port Trigger Type Public Port Public Type Enabled 3724 TCP 3724 TCP Y 6112 TCP 6112 TCP Y 6881 TCP 6881-6999 TCP Y * The port numbers given are just an example. You need to open the ports depending on the application you are using and should get the information from the application provider.
Answers & Comments
How do I open ports in the Virtual Server? You need to forward the ports used by the application to the server running the application in the Virtual Server, which is present in the router's management screen, as follows.
- Open your web browser, type in the router's IP address (standard: 'http://192.168.2.1') and press enter.
- Click on Login, Advanced Setup, NAT, Virtual Server.
- Enter the port details and enable it as follows:
Private IP Private Port Type Public Port 192.168.2.x xxx TCP xxx 192.168.2.x xxx UDP xxx To access the application, you can open up the ports specific to the application in the special application, which is present in the router management screen as follows:- Open your web browser, type in the router's IP address (standard: 'http://192.168.2.1') and press enter.
- Click on Login, Advanced Setup, NAT, Special Application.
- Enter the port details and enable it as follows:
Trigger Port Trigger Type Public Port Public Type Enabled 3724 TCP 3724 TCP Y 6112 TCP 6112 TCP Y 6881 TCP 6881-6999 TCP Y* The port numbers given are just an example. You need to open the ports depending on the application you are using and should get the information from the application provider.