Connecting dvd player
I have a older symphonic TV that only has a coaxil input in the back & in the front there is a jack for video & only one for audio. I plugged in RCA's to the front but the TV doesn't pick up the DVD player. I also can not find a place to change the input to excternal
Televison & Video - Symphonic - ST420FF 20" TV
Answers & Comments
You need a remote controller to be able to switch input modes. If you don't have the remote and can't find it ever then the only way to reach your tv is through coaxial antenna port. So you can buy an rf modulator ( very cheap) and connect your red yellow and white cables (rca cables from a dvd, game console etc) to the modulator then connect the modulator to your antenna with a coax cable. This worked for me. It placed the connection to channel 4 and other channels are still working,
You can buy the RF Modulator from: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180299245670
I have the same problem too and I need help! I used to be able to watch dvd. After I hooked a cable line to it I wasn't able to use my dvd player anymore. I unhooked the cable line and reconnected the dvd player the same it was at first but to no avail. Can you guys help me? I looked through the entire menu options on the tv screen but couldn't find any selection that would allow me to return the tv to a video/dvd mode. I also don't have a modulator. Please Please help! Thanks
The tv should be in video mode in order to accept input from dvd...when it does'nt work try to use a modulator that should be connected at the back through using cable with f-connector both sides...