Control Panel Started pressure cooking last night. After several minutes I noticed the control panel was not lit up. The contents were warm. There was no power surge or interruption of power. The outlet is in good working order. I unplugged the unit and tried again. Pulled everything apart and found it to be clean and free of debris. The control panel simply will not function. This is only about the sixth time it has been used
Remove control panel to have access at it's contacts and inspect it's general condition. if there is water leak inside they must be cleaned with spray cleaner and let dry before reassemble and try. Good luck!
There is something short or some cable wires which helps control pannel to function is faulty.its a common problem faced by many user .it can be repaired if minor short.or replaced if major short.
Answers & Comments
Remove control panel to have access at it's contacts and inspect it's general condition. if there is water leak inside they must be cleaned with spray cleaner and let dry before reassemble and try.
Good luck!
Sorry Unfortunately your model is currently unavailable.Couldn;t find parts somewhere. See link.. perhaps later...
http://www.amazon.com/RUSSELL-HOBBS-NUTRITIONIST-PRESSURE-COOKER/dp/B0009AES0Y
Try to send it back to the shop were you bought it if your item is on warranty. so that they can replace or repair it. hope that helps!
CHARCOIS
There is something short or some cable wires which helps control pannel to function is faulty.its a common problem faced by many user .it can be repaired if minor short.or replaced if major short.
thanks.
the internal unit is perfectly ok.only the front panel is faulty.get it done.
thanks