copying. The erroe message says... Print Unable 4F See Troubleshooting and Routine Maintenance in User's Guide... This was given to me so I don't have a user's guide, what do I do?
Hi, Access the internal maintenance mode by pressing the Menu/Set button, then press * 2 8 6 4 within 2 seconds. This should put you in the maintenance mode menu. Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.
This will reset the purge count value. Then the printer will restart, hopefully without the annoying cannot clean message.
You'd be surprised how this fixes inoperable MFC210c's--TRY THIS FIRST! let me know if need any more help!
Answers & Comments
Hi,
Access the internal maintenance mode by pressing the Menu/Set button, then press * 2 8 6 4 within 2 seconds. This should put you in the maintenance mode menu. Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.
This will reset the purge count value. Then the printer will restart, hopefully without the annoying cannot clean message.
You'd be surprised how this fixes inoperable MFC210c's--TRY THIS FIRST!
let me know if need any more help!
Error 4F means your printhead is RIP, mostly due to bad quality ink