In the ATT region, they use PPPoE (in general, even if you have sticky static IPs) plug in the router, turn it on, open Internet Explorer and type 192.168.1.254 a little window will pop open the username is admin, the password is the serial number on the bottom of the netopia click on configure, then click on quickstart type in your username (the emaill address from ATT like [email protected]) and your password for your email address click submit underneath it clike the yellow triangle up at the top right click save and restart in like 2-3 minutes, you can open IE or firefox, whatever and see if you're online (you should be) spin .
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
In the ATT region, they use PPPoE (in general, even if you have sticky static IPs)
plug in the router, turn it on, open Internet Explorer and type 192.168.1.254
a little window will pop open
the username is admin, the password is the serial number on the bottom of the netopia
click on configure, then click on quickstart
type in your username (the emaill address from ATT like [email protected]) and your password for your email address
click submit underneath it
clike the yellow triangle up at the top right
click save and restart
in like 2-3 minutes, you can open IE or firefox, whatever
and see if you're online (you should be)
spin
.