Creda W100FW Front Load Washer. access to service drain plug?
Creda W100FW, simplicity 1000. Front Load Washer. anyone know where i gain access to the service plug on the waste water pipe, to be able to clean out any debris that builds up? hope that makes sense.
sometimes there is a screw-out plug on the front of some machines, at the bottom, behind a panel of somesort. but on this one, i cant see there is one. so im wondering if there is one somewhere else?
just that i dont want to drag the washing machine out, dismantle it, only to find there isnt one to clean out.
thanks.
Washing Machines - Creda - W100FW Front Load Washer
Answers & Comments
Hi.
Remove lower rear cover of washer, locate pump, and remove large hose attached to it, remove and clean filter inside hose, check pump for possible blockage.
Please rate my solution.
Thanks.
Just changed the bearings on my creda simplicity 1000 w100fw
rebuilt it water going in and out ok, now the washing cycle does not work,plenty clicking noises, any IDEA.
many thanks, John