Curcuit dc protection
I have xpower inverter 3000 what size breaker for two 12 volt batteries in parralel would be advised (west marine 650 amp hr batt.)
Electronics - Others - Xantrex Technology - DC to Dual-Outlet AC Power Inverter
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
For your inverter to charge two 12 volts
650 amper hour, it will require a current
between 7amp s to 15amps. So i will
recommend a 60amps circuit breaker.
The best type should be such that
allows a firm contact so that there is no
voltage drop. An example is any type
that will need you to use a cable log.
Any connection via cable logs provides
a very firm contact.Note that a lose
contact will reduce the run time of you
inverter and will make the charging
time to be longer than expected.
breaker must have a DC rating if not it maybe will not be able to protect