Cycle ends and dishes are not dry
There seems to be quite a lot of left over water on the dishes, door, and just not very well dried. I think this is much different than just a few months ago. The Energy Save Dry button is not pushed as far as i can tell. Any ideas on what could be the problem.
Also i see mention of a filter change - is this something a consumer can take care of and how? Or is it better left to a professional?
Thanks.
Dishwashers - KitchenAid - 24 in. KUDI01ILBS Stainless Steel Built-in Dishwasher
Answers & Comments
Drying dishes in a closed, hot chamber always seemed stupid to me.
We have made it a practice to open the machine, just crack at the top (our latch can be opened, door then tilted slightly, then latch closed again) to allow some of the moisture to escape.
OK, maybe your house isn't as dry as ours, but the additional humidity hasn't been a problem.
The filter serves to trap particles during the wash cycle, it shouldn't affect drying performance at all.
Your user guide will probably tell you if the filter is owner-accessible or not.
I checked but did not find a downloadable manual for your machine with a cursory look.