Denon AVR3300 - Resetting activated Protection Circuit
Protection Circuit of my Denon AVR3300 got enabled due to mismatch of Front Speaker impedance. Now I disconnected the Front Speakers and still the Receiver does not come out of Protection Circuit active. The protection circuit is still active and I am not able to reset the same. Any idea how I can get the protection circuit deactivated?
Audio Players & Recorders - Denon - AVR-3300 Receiver
Answers & Comments
Hi
Remove all speakers cables or wires and check all from behind the Receiver. if there are any loose terminals or any metal object in between the terminals.
though it might be a coincidence that you have a problem in the Receiver.
unplug the power cable from the wall socket and remove all cables.
after you remove the cables plug the power cable in the wall socket and try if you see the protection displayed , the receiver needs service.
Good Luck
Regards