Some power tools have a thermal reset switch built in. It sounds as if the thermal overload is faulty, or the unit has overheated. Check to insure the cooling ports of the motor are not clogged with sawdust.
Will do many thanks for your help Will do many thanks for your help
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Some power tools have a thermal reset switch built in. It sounds as if the thermal overload is faulty, or the unit has overheated. Check to insure the cooling ports of the motor are not clogged with sawdust.
Will do many thanks for your help