Hi i'm trev , just wondering if you would know the head tourqe settings and valve clearance for the charade g200 1.3l 4cyl. Created by outlaw136. Cars & Trucks - Daihatsu - Charade - 1992 Daihatsu Charade

Diahatsu charade g200 1996 1.3 liter

Dear Sir/madam,

Valve clearance adjustment must be performed to manufacturer'sspecifications. It is normal that the exhaust valve will have a largerclearance. Adjustment is performed by either adjusting the rocker armor placing shims between cam follower and valve stem. Most modernengines have hydraulic lifters and require only infrequent adjustment.
Valve clearance measurementValve clearance is measured with the valve closed, typically at top dead center between the compression and power strokes. The tappet will be resting on the heel of the cam lobe. A feeler gaugemust pass through the clearance space. The feeler gauge should fit inand out with a slight drag. If the feeler gauge will not fit in, thenthe clearance is too small. If the blade of the feeler gauge fits intoo loosely, the clearance is too large.

AS PER TECHNICAL MANUAL IT IS AS FOLLOW:-
VALAVE CLEARACNCE:- ( HOT)
(CB MODEL )
INTAKE.....00.20mm or 0.0078 inch
EXHAUST..00.20mm or 0.0078 inch
(CL MODEL)
INTAKE......0.25mm or 0.0098 inch
EXHAUST...0.30mm or 0.0118 inch

thanks
good luck

Ginko

Approx 43.4249 ft-lb

Ginko

I believe values are 5.0 6.0
Any value that you can get here on the web may be wrong or approximate.
If you remount head with wrong torque you rist troubles with head gasket, compression etc.
To get the exact values for cylinder head Torque settings , best thing to do it is buying Haynes or Chilton repair manual.
On the manual you will also find head removal, and full car disassemblies illustrated procedure.

Here you can order haynes manual

Here you download a free repair manual. click right mouse button here, on Mirror and chose save file, direct click wont work.

Here is part of diagram with torque value:

Answers & Comments

Helpful Links

Helpful Social