F30 - Open probe connection.All you do is take off the bottom front panel (there are 3 screws). After the panel is off, there is a turn knob right in front in the middle. Simply unscrew it and remove any thing in the "catch". Screw back (re-attach) the knob and you are good to go
Answers & Comments
F30 - Open probe connection. All you do is take off the bottom front panel (there are 3 screws). After the panel is off, there is a turn knob right in front in the middle. Simply unscrew it and remove any thing in the "catch". Screw back (re-attach) the knob and you are good to go