Display on our dcs oven is beginning to fade. can i fix it?
The display is beginning to fade on our dcs oven. can it be fixed by owner or does it need to be serviced?
Ovens - DCS - WO-130 Stainless Steel Electric Single Oven
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Hello just repaired my DCS wall oven. LCD screen is no good. part # lcd only is 211708. cost is $85.00 dollars with shipping. Took me twenty minutes to install. just need one philips head screw driver.Just call DCS [email protected] 1-888-281-5698 new Zealand.
Excellent. Ordered this part after some due diligence and seeing your post here. I was being told by a parts rep at DCS I had to order the whole control panel for $292 shipping
can you please post the directions
Hi there,
the reason your display is fading is because the pixels on the lcd screen are separating or the wiring harness from the keypad to the display board is dirty. unfortunately, lcd screens are not repairable themselves. i would recommend you have a technician come and take a look and replace it.
thanks