DIY lamp I hook a 110V 100W bulb to the pj402d. It lit up for 5 sec. then it turned off. No damage was done to the bulb or projector. Is there a cheap way to replace the bulb with something else? There must be a modification to the sensor circuit that will allow a substitute bulb to operate properly
I had the same problem awhile back and looking around for an answer i found this. http://recklessphilosophers.com/2008/05/02/home-theatre-for-63--dlp-pj-retrofit-for-7-bulb-instead-of-300.aspx
Answers & Comments
I had the same problem awhile back and looking around for an answer i found this.
http://recklessphilosophers.com/2008/05/02/home-theatre-for-63--dlp-pj-retrofit-for-7-bulb-instead-of-300.aspx