Sending a FAx over a telephone using adsl can be tricky, using a filter will help but you might want to make sure your baud rates are low, TRY 9600 baud, if you get any higher then that your filter might not filter it out and thus confusing the adsl connection.
I know mine works fine, make sure your fax is plugged into the TELEPHONE side of the filter!
I use 9600kbps , I do not recommend going any higher then that.
If that does not work you going to need to try another filter, last but not least call the telephone company if you are loosing connection.
Thanks for the questions, I hope my answer was Very Helpful.
Regards
rulds2008
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620
Answers & Comments
Hello, Thanks for allowing me to help.
Sending a FAx over a telephone using adsl can be tricky, using a filter will help but you might want to make sure your baud rates are low, TRY 9600 baud, if you get any higher then that your filter might not filter it out and thus confusing the adsl connection.
I know mine works fine, make sure your fax is plugged into the TELEPHONE side of the filter!
I use 9600kbps , I do not recommend going any higher then that.
If that does not work you going to need to try another filter, last but not least call the telephone company if you are loosing connection.
Thanks for the questions, I hope my answer was Very Helpful.
Regards
rulds2008
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620