Hi Schofield,Lets check again. Are you sure you are getting *12VDC on the positive side and that the ground is really grounded?Check them against each other with a meter or test light.Bench check the unit to make sure it works with a separate power supply (if necessary).Let me know the resultsMike
There should be a manual release on the bottom of the unit look for a slotted hole near the front underneath where the try ejects slide this across and the tray should release the DVD.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Hi Schofield,
Lets check again. Are you sure you are getting *12VDC on the positive side and that the ground is really grounded?
Check them against each other with a meter or test light.
Bench check the unit to make sure it works with a separate power supply (if necessary).
Let me know the results
Mike
There should be a manual release on the bottom of the unit look for a slotted hole near the front underneath where the try ejects slide this across and the tray should release the DVD.