Don't have the model #s, but had bought a lg sump pump a year ago or so, it float failed - did not go off. now bought another one yesterday, a smaller model, but we have to lift the float manually, otherwise it does not come on! Even then, sometimes it sounds like the motor hums but the pump does not start - it only starts about every third time what is wrong? basement is flooding badly, need a reliable pump
Electrical Supplies - Flotec
Answers & Comments
I would make sure that the pump is setting securely in the pit so that it can not move and hang the float up on anything.If you have a lot of trash or debris in the pit then unplug your pump and remove and clean regularly I have used bricks or wire to hold the pump in place to keep the float free.
One of the best pumps that I've sold for over 25 years is a little giant. They have a 1/3 H.P. model with the float secured on a rod hooked to the pump casing so it can only move up or down. Hope this helps. Thank you.
Correct answer from Jack, if is starting up to much the only option is to have someone fabricate a longer rod. Unfortunately, Flotec and many others make the rods too short for a standard size sump insert !!! good luck.