Don't know how to use carpet shampooer
I bought a Rainbowon 10/29/08. I cannot find my user instruction booklet and I do not know how to use the carpet shampooer. I don't know how to get it hooked up to do the job. It is Series E. I have called the local distributer and was told to go on line and print the book. I did, but there were no carpet cleaning instructions on the print out.
Vacuums - Rainbow - E series Canister Wet/Dry Vacuum
Answers & Comments
You should have the new aquamate, it has a blue top to fill with the water and water/soap solution that pops down into place. You will need to use your power nozzle hose and tube, connect it to your shampooer (make sure to connect the power connection just like the power nozzle). Fill your water up, large compartment is for cold water only and the smaller compartment is for one cap full of soap then the rest filled with cold water. Start with just a splash of water or an empty basin in the rainbow. The trigger will control your water spray and the brush underneath. There are two levers on the back of the shampooer marked with a shower head and a bar of soap. Use the soap with the shower head and the soap on and the water only with just the shower head on. You will want to also go over the area shampooed with both off to **** up the remaining water. Make sure to clean your floor thoroughly before shampooing.