Dont know how to work it
I dont know what buttons to press before i type in the code and i know that there is certin buttons that you have to press does ne one know which ones those buttons might be
Televison & Video - One For All - URC4110 Remote Control
Answers & Comments
Try getting the manual from retrevo.com Julio [email protected]
1. Turn on a your device (TV, VCR, etc)
2. On the remote control, press the device key (i.e. TV, VCR, ect.) once ). Press and hold SET until the LED blinks twice, then release SET.
3. Enter the first four-digit code for your component you can find in the User Manual. If performed correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, then repeat steps 2 through 3 and try entering the same code again.
For more advice and troubleshooting, download the URC4110 User Manual with all codes from here:
http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/one_for_all/urc4110-manual.zip&area=other