Door won't stay latched on dishwasher
Both the plastic latch on the door and the metal latch have been replaced. The door seal was also replaced and that's when the latch started not holding.
Dishwashers - KitchenAid - 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
Answers & Comments
Make sure nothing is binding the racks which could be pressing against the door when closed. Also make sure the dishwasher isn't installed too tightly in its place, which puts pressure on the latch. You may need to lower the leveling legs a bit.
Normally the new seal is installed flush to the tub without any extra, so if theres extra you can try reinstalling the seal or cutting off the extra.
Ok, I'll try lowering and re-leveling first before I decide to do any trimming.
Thank you!