You probably need a new belt. Most towns have a store that sales parts for home appliances. I bought one for 15 bucks a few years ago. You will have to take many screws out of the back then there are some clips that come out. The whole front should come off. the drum may fall down. Put the belt around the drum, around the motor shaft, then place the drum on the rollers. It is going to be kinda hard to hold the drum in alignment with everything. I used a shoebox to hold the drum up in the front. once you have everything in place you can open the door on the drier and hold up the drum and remove the shoebox. now you can insert the screws and it should work. Good luck.
Answers & Comments
You probably need a new belt. Most towns have a store that sales parts for home appliances. I bought one for 15 bucks a few years ago. You will have to take many screws out of the back then there are some clips that come out. The whole front should come off. the drum may fall down. Put the belt around the drum, around the motor shaft, then place the drum on the rollers. It is going to be kinda hard to hold the drum in alignment with everything. I used a shoebox to hold the drum up in the front. once you have everything in place you can open the door on the drier and hold up the drum and remove the shoebox. now you can insert the screws and it should work. Good luck.
Its possible that there is something caught in blower,verify this by removing front . if drum turns freely by hand you probably have a bad belt