You will have to take the front panel off. first unplug the dryer then there will b two screws in back that hold top on, once screws r out the top will slide back allowing to lift up. there r 4 screws that hold the touch/display panel on. unplug and remove. there r another 4 screws under that panel that hold the front panel and there 2 more when u open door about as high the lint screen. once all screws r out u should b able to see heater. if not remove all other necessary components. it will b at the bottom left. remember this usually the cause of a heater failure is a clogged or restricted vent. tall tell sign close took a long time to dry.