The sensors are just thermal switches that are normally closed (zero ohms) when cold. Be sure to check for 220 VAC across the two slanted prongs on the power plug (when plugged in). If nothing, check the twin breakers in the house panel--turn off, then on. Recheck power at the socket. Hope this helps!
Answers & Comments
The sensors are just thermal switches that are normally closed (zero ohms) when cold. Be sure to check for 220 VAC across the two slanted prongs on the power plug (when plugged in). If nothing, check the twin breakers in the house panel--turn off, then on. Recheck power at the socket. Hope this helps!