Sounds like an RF problem. If its barfoot, make sure the power wire doesn't cross the coax. If its on a linear, make sure the coax does not cross and the power wires are not near the radio. Also, if you are running a power mic, the gain may be too loud.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Sounds like an RF problem. If its barfoot, make sure the power wire doesn't cross the coax.
If its on a linear, make sure the coax does not cross and the power wires are not near the radio.
Also, if you are running a power mic, the gain may be too loud.