Take 2 screws out the bottom of the front panel and yank the panel off from the front.The fuse,highlimit and heater are all easily accessed on the bottom rear left hand side. All you need to do is remove two hexhead screws and the heating assembly comes right out.
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Answers & Comments
Take 2 screws out the bottom of the front panel and yank the panel off from the front.The fuse,highlimit and heater are all easily accessed on the bottom rear left hand side. All you need to do is remove two hexhead screws and the heating assembly comes right out.
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61