Eagle338 -- Here's hoping you can tell me parts numbers and locations of parts to suspect for images that are "stacked on top of each other" on a Mitsubishi #WS55511 [Several identical images partially overlapping vertically.] Thanks, renthelp249cb
I have seen this Question for a Long Time, so thought of Helping you.This TV has a convergence issue, first see if they will move manually in your menu, they should be able to move up down left and right, and if not this is when two chips labeled STK392-xxx Failed. They can be located by finding the largest heat sinks in the unit.
Along with the possibility being a open resistor and or open fuse in the convergence circuit . All of the resistors around these chips should be checked pay attention to the ones that are standing up and they all should read low ohms, If they are in the k ohms they are probably open which is bad ,This is a tricky repair, if you have Never done this repair I don't suggest it friend.
Answers & Comments
Hi,
I have seen this Question for a Long Time, so thought of Helping you.This TV has a convergence issue, first see if they will move manually in your menu, they should be able to move up down left and right, and if not this is when two chips labeled STK392-xxx Failed. They can be located by finding the largest heat sinks in the unit.
Along with the possibility being a open resistor and or open fuse in the convergence circuit . All of the resistors around these chips should be checked pay attention to the ones that are standing up and they all should read low ohms, If they are in the k ohms they are probably open which is bad ,This is a tricky repair, if you have Never done this repair I don't suggest it friend.
Look at the link below :-
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
You could look at the Service Manual from :-
http://www.scribd.com/doc/6677240/Mitsubishi-Service-Manual-Chassis-V21
Regarding Convergence IC's, you could Buy it Online or go to Radio Shack or Fry and get it from there.
Let me know, if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!